BAR BENDING MACHINE

MADE BY TRIAX

4 HP

420 KG

ITALY

PFX-42


TRIAX produces electric bar bending machines since decades with a technology that makes very performing, reliable and safe. Our machines to bend concrete reinforcing steel bars are designed to provide maximum efficiency and ease of use which is extremely important in modern construction and building sites.


KEY FEATURES:

  • Self-braking electric motor characteristic that greatly extends the life of the motor that do not undergo electric shocks while reversing rotation.
  • Two-stages epicicloidal gear unit with gears in constant oil bath that allows to carry any bending reducing much the mechanical effort.
  • Automatic graduated regulator with which it is possible to accurately determine the bending angles, a much more accurate and faster system of the old system with holes around the bending disk.
  • Bending disk rotating in both directions, after bending the reinforcing steel bar or steel round bar will automatically return to the starting point.
  • Electric dual controls with foot pedal that allows great freedom of movement to the operator in selecting the most suitable working position in respect to the machine.
  • Safety micro switch on the door which, also with connected power, switches off the machine if the door is open as required by current safety regulations.
  • All electric controls work with low voltage 24V according to current regulations.

Available Models
# Model Capacity Weight
1 PFX-42 36mm dia 420 KG
2 PFX-52 42mm dia 460 KG

REBAR BENDING MACHINES PRODUCED VERSIONS:

Electric rebar bender as per EC norms. Designed and built following the criteria necessary to meet safety requirements established by current Machinery Directive 2006/42/EEC.